SM: Work on the new body, continued

SM: Work on the new body, continued

During August 2005, I’m in France for vacation, so I can go to the body shop, the body is almost finished: sm_173First sight to the beast 😉 sm_174The interior and the front unit are gray sm_175The exterior panels will stay on primer until the final paint...
SM: gearbox cleaning

SM: gearbox cleaning

While waiting to go ahead with the engine, I switch to the gearbox: first cleaning with gasoline, first pass with a gross metallic brush, second pass with a softer brush and then finishing with a towel full of degreaser. I found a degreasing product with an orange...
SM: Work on the new body

SM: Work on the new body

I first thought that I will not have any pictures of the body work, but yes, I got some! Here are the first ones: sm_157We start with an overview: the usual trunk bottom is in bad shape sm_158Then it’s the bottom of each rear fenders, in very bad shape also...
SM: Engine cleaning

SM: Engine cleaning

I ordered many parts to the french SM Club, like valves, timing chains and engine gasket set. I will be able to start working on the engine. Anyway, I will probably give the engine to a professional to install and adjust the valves and chains. I start by cleaning...
SM: New body

SM: New body

My father found a body in France that’s almost “naked”. This one is in pretty good original condition but needs steel metal work anyway. Here are some pictures of this body. It’s not rust free but it seems that there is no major damage....
SM: Interior dismantling

SM: Interior dismantling

sm_147Disassembling is quite fast for the interior, there is less rusty bolts and screws sm_148The dashboard and wiring harness are more difficult to remove sm_149There is not so much left. We can easily see the amateur steel sheet work made on the floor panels...