18 October 2005 | Mechanical, SM
After having done most of the cleaning work on the gearbox, I go ahead by reassembling brake discs and calipers. sm_189To put back the brake discs (new), I borrowed a comparator to measure the rotation defect… sm_190… it’s ok, the rotation defect is...
4 October 2005 | Mechanical, SM
By September 2005, I start working on the hydraulic devices. I start with the clutch cylinder and the front brake calipers: sm_203The clutch cylinder is not difficult to disassemble… sm_204… but removing the inner gasket is a nightmare, I had to use...
